Saturday, November 2, 2019

Network Infrastructure Basics in the LAB Assignment

Network Infrastructure Basics in the LAB - Assignment Example The most important thing about this standard is that there is no backward compatibility it supports. I installed this card in the PCI slot of the motherboard of the PC and completed my LAB. In this LAB (6.2.4) requirement was to set up a wireless environment in by installing a high-speed wireless card in PC and a wireless access device in LAPTOP which is without a wireless built-in wireless adaptor (Habraken, 2003). Another thing to check here was to set up a device so that it can be accessed by any other wireless adaptor. So I used the following devices from the available ones according to the standards given in the LAB 6.2.2 (Wireless Standard Facts). After completing this LAB I have found that 802.11n standard is fastest amongst all the others (802.11a/b/g), with data rate up to 600 Mbps at 2.4 GHz frequency 802.11n promises significantly higher speed and range. It also includes backward compatibility with 802.11 a/b/g (Labsim). In this LAB (6.2.4) it was required to set up a high-speed wireless environment just to transfer files between LAPTOP and computer at very high speed and not to install an extra device. LAPTOP already has a built-in wireless network adaptor. After reviewing LAB 6.2.2 (Wireless Standard Facts) and amongst the given adaptors I choose 802.11b/g adapter. There were many other devices also available in this LAB including an access point. I installed the 802.11b/g wireless adapter on the computer. As per the Wireless Standards, Facts 802.11g operates at 2.4 GHz at speeds up to 54 Mbps. With just the wireless adapter installed, you can create an ad hoc wireless network and connect directly to the laptop to transfer files (Saha, Mukherjee, & Bandyopadhyay, 2003).

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.